Mezclador FMX42U

Mezclador Azden de rodaje con vúmetros analógicos con SALIDA USB PARA GRABACIÓN EXTERNA. Cuatro señales entradas y una salida XLR balanceadas alimentación con baterías AA. Alimentación Phantom conmutable y generador de 1Khz. Conmutación de micro o línea para las entradas.

Más detalles

FMX-42U


Of course the FMX-42u still boasts the many features of its predecessor, which include 4 balanced XLR line/mic inputs with individual level and pan controls, switchable (per channel) 48V phantom power and limiting, professional quality VU meters for accurate level setting, master level control, 1k tone generator, 2 balanced XLR outputs (line/mic switchable), stereo mini-jack output for DV cameras and a headphone output with level control. 

The FMX-42u can be powered by either 6 internal “AA” batteries or an optional 12V DC external power supply (Azden part #BC-27H). A ballistic nylon carrying case is included. (necessary USB cables and adapters are not included but readily available from electronics suppliers)

Features:

  • On-board A/D converter and 2-channel mini-USB digital audio output
  • Mini-USB output connects to computer, smartphone or tablet
  • Simultaneous use of both outputs allows the analog signal to be sent to the camera while a backup digital signal can be sent to a smartphone or tablet or computer via mini-USB
  • 4 balanced XLR line/mic inputs and pan controls
  • Switchable 48V phantom power and limiting
  • Professional-quality VU meters
  • 2 balanced XLR outputs (line/mic switchable)
  • Stereo mini-jack output for DV cameras
  • 6x AA battery powered
  • Optional A/C adapter

In The Box

  • FMX-42u mixer
  • Nylon carrying case
  • Manual
FREQUENCY RESPONSE
  • Balanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB)
  • Monitor Output: 30 Hz - 30 kHz (+0/-2 dB)

GENERAL

  • Signal-to-Noise Balanced Output: -120 dBu (A weighted, input equivalent level)
  • T.H.D. Balanced Output: less than 0.005% @ 1 kHz (at LINE position +19 dBu output)
  • Phantom Power Voltage: 48V (±4V)
  • Sample Tone Frequency: 1 kHz
  • Battery Requirement: 6 Alkaline "AA"
  • Battery Runtime: Approx.10 hours (Meter Illum & Phantom Power OFF)
  • External Power: 12V DC @ 200mA
  • Dimensions: 220mmW x 160mmD x 56mmH (without protrusions) 
  • 9"W x 6 1/2" D x 2 1/4"H (without protrusions)
  • Weight: 1,350 grams/3 lbs (without batteries)
CURRENT DRAIN
  • 164mA (Meter Illum & Phantom OFF @ 9V) 
  • 192mA (Meter Illum OFF, Phantom ON w/1 MIC @ 9V) 
  • 125mA (Meter Illum & Phantom OFF @ 15V)
INPUT
  • Balanced Input: XLR 3-pin Female x 4 (CH1, 2, 3 & 4)
  • Level +4 dBu (LINE) Standard: +4 dBu (electronically balanced) 
    Maximum: greater than +26 dBu 
    Impedance: 20kΩ
  • -30 dBu (MIC 1) Standard: -38 dBu (electronically balanced) 
    Maximum: +4 dBu 
    Impedance: 2kΩ
  • -55 dBu (MIC 2) Standard: -58 dBu (electronically balanced) 
    Maximum: -15 dBu 
    Impedance: 2kΩ
  • High Pass Filter (HPF)  100Hz - 6dB/oct
RETURN INPUTS
  • Hirose 10-pin Female for Hirose Plug Part #RM15TD-10P 
    3.5mm (1/8") Stereo Mini-Jack 
  • Input Level: -20 dBu - +19 dBu (unbalanced) 
  • Impedance: 11kΩ
OUTPUT
  • Balanced Outputs: XLR 3-pin Male x 2 (Output L & R) 
    Hirose 10-pin Female for Hirose Plug Part #RM15TD-10P
  • Unbalanced Output: 3.5mm (1/8") Stereo Mini-Jack
  • Monitor Output: 6.3mm (1/4") Stereo Jack
  • Digital Output Connector: USB mini-B (female)
    • Interface Format: USB 2.0 full speed
    • Audio Data Format: Isochronous data format
    • Sampling Frequencies: 16 / 22.05 / 32 / 44.1 / 48 kHz compatible
    • Bit Depth: 8 / 16-bit compatible
    • Channels: 2
    • Device Name: USB AUDIO CODEC
BALANCED OUTPUT LEVEL
  • +4 dBu Standard: +4 dBu (electronically balanced, greater than10kΩ load) 
    Maximum: +20 dBu (electronically balanced, greater than 10kΩ load) 
    Impedance: 600Ω
  • -36 dBu Standard: -36 dBu (electronically balanced, greater than 10kΩ load) 
    Maximum: -20 dBu (electronically balanced, greater than 10kΩ load) 
    Impedance: 600Ω
UNBALANCED OUTPUT LEVEL
  • Standard: -36 dBu (electronically balanced, greater than 10kΩ load) 
    Maximum: -20 dBu (electronically balanced, greater than 10kΩ load) 
    Impedance: 120Ω
MONITOR OUTPUT
  • Maximum: +1 dBu (32Ω load at 9V) 
    16-100Ω load recommended
  • Meters - Standard Output Level: 0 VU (+4 dBu)

No customer comments for the moment.

Escribe tu opinión

Mezclador FMX42U

Mezclador FMX42U

Mezclador Azden de rodaje con vúmetros analógicos con SALIDA USB PARA GRABACIÓN EXTERNA. Cuatro señales entradas y una salida XLR balanceadas alimentación con baterías AA. Alimentación Phantom conmutable y generador de 1Khz. Conmutación de micro o línea para las entradas.

Escribe tu opinión